编译支持ipv6的rtorrent并配置webUI

参考自北交大Ditto老师的文章
安装必要的依赖文件，如果你Ubuntu的build-essential那么安装下

[bash]sudo apt-get install build-essential[/bash]

然后

[bash]sudo apt-get install libsigc++-2.0-dev libcurl4-openssl-dev libncurses5-dev[/bash]

解决控制台终端乱码。
安装前安装下ncursesw这样config是时候就不会连接到ncurses，如果安装后编译出来使用还是乱码（配置文件里面加了UTF-8还是乱码），请检查生成的Makefile里面是不是-lncursesw 如果不是 试试 with-ncursesw开关 或者手动修改

[bash]sudo apt-get install libncursesw5-dev[/bash]

若通过autogen安装，需要安装必要的文件.我没有

[bash]sudo apt-get install automake libtool[/bash]

Ubuntu下面没有libtoolize这个软件包

---

下载xmlrpc-c stable 1.16 （Revision 1964）

[bash]svn co https://xmlrpc-c.svn.sourceforge.net/svnroot/xmlrpc-c/release_number/01.16.07/ xmlrpc-c
cd xmlrpc-c/
./configure
make
make install[/bash]

从这里明确并获取最新的补丁

http://libtorrent.rakshasa.no/ticket/1111

编译安装libtorrent并打上ipV6补丁

[bash]
wget http://libtorrent.rakshasa.no/downloads/libtorrent-0.12.6.tar.gz
tar zxvf libtorrent-0.12.6.tar.gz
cd libtorrent-0.12.6
#http://home.samfundet.no/~sesse/libtorrent-0.12.6-ipv6-06.patch （此patch的webUI有问题）
wget http://home.samfundet.no/~sesse/libtorrent-0.12.6-ipv6-07.patch
patch -p1 < libtorrent-0.12.6-ipv6-07.patch
./configure --enable-ipv6
make
make install[/bash]

编译安装rtorrent并打上ipV6补丁

[bash]wget http://libtorrent.rakshasa.no/downloads/rtorrent-0.8.6.tar.gz
tar zxvf rtorrent-0.8.6.tar.gz
cd rtorrent-0.8.6
# http://home.samfundet.no/~sesse/rtorrent-0.8.6-ipv6-06.patch （此patch的webUI有问题）
wget http://home.samfundet.no/~sesse/rtorrent-0.8.6-ipv6-07.patch
patch -p1 < rtorrent-0.8.6-ipv6-07.patch
./configure --enable-ipv6 --with-xmlrpc-c
make
make install[/bash]

载入配置

[bash]ldconfig[/bash]

---

这是我编译的套件deb包
[download id="18" format="2"]

---

编辑配置文件

[bash] cp /root/rtorrent-0.8.6/doc/rtorrent.rc ~/.rtorrent.rc
nano ~/.rtorrent.rc[/bash]

这是我的配置文件

[bash]# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.

# Maximum and minimum number of peers to connect to per torrent.
#min_peers = 40
#max_peers = 100

# Same as above but for seeding completed torrents (-1 = same as downloading)
#min_peers_seed = 10
#max_peers_seed = 50

# Maximum number of simultanious uploads per torrent.
#max_uploads = 15

# Global upload and download rate in KiB. "0" for unlimited.
#download_rate = 0
#upload_rate = 0

# Default directory to save the downloaded torrents.
#定义下载保存目录
directory = /home/autotorrent/files

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
#定义会话session保存的目录
session = /home/autotorrent/sessions

# Watch a directory for new torrents, and stop those that have been
# deleted.
#监视目录，若torrent增加，则自动开始下载
schedule = watch_directory,5,5,load_start=/home/autotorrent/torrents/*.torrent
schedule = untied_directory,5,5,stop_untied=/home/autotorrent/torrents/*.torrent

# Close torrents when diskspace is low.
#当磁盘空间不足时候关闭种子下载
schedule = low_diskspace,5,60,close_low_diskspace=100M

# Stop torrents when reaching upload ratio in percent,
# when also reaching total upload in bytes, or when
# reaching final upload ratio in percent.
# example: stop at ratio 2.0 with at least 200 MB uploaded, or else ratio 20.0
#schedule = ratio,60,60,"stop_on_ratio=200,200M,2000"

# The ip address reported to the tracker.
#ip = 127.0.0.1
#ip = rakshasa.no

# The ip address the listening socket and outgoing connections is
# bound to.
#bind = 127.0.0.1
#bind = rakshasa.no

# Port range to use for listening.
#port_range = 6890-6999

# Start opening ports at a random position within the port range.
#port_random = no

# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
#check_hash = no

# Set whetever the client should try to connect to UDP trackers.
#use_udp_trackers = yes

# Alternative calls to bind and ip that should handle dynamic ip's.
#schedule = ip_tick,0,1800,ip=rakshasa
#schedule = bind_tick,0,1800,bind=rakshasa

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
# encryption = allow_incoming,enable_retry,prefer_plaintext

# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
#
# dht = auto

# UDP port to use for DHT.
#
# dht_port = 6881

# Enable peer exchange (for torrents not marked private)
#
# peer_exchange = yes

#
# Do not modify the following parameters unless you know what you're doing.
#

# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10

# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100

# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
scgi_port = localhost:5000
#监听5000端口，与apache的SCGI配置一致
umask = 0002
#使用正确权限，防止无法子读取自己的文件
encoding_list = UTF-8
#如果你修改为UTF-8还是乱码 请看编译过程里面是否安装了 ncursesw http://ihipop.info/2010/08/1363.html#charset
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = no
[/bash]

建立目录

[bash]mkdir -p /home/autotorrent/files
mkdir -p /home/autotorrent/sessions
mkdir -p /home/autotorrent/torrents[/bash]

[bash]#若没有安装php环境，且使用ubuntu的话，用tasksel安装一台LAMP吧，然后最简安装php5-cli php5-xmlrpc php5-sqlite libapache2-mod-scgi即可
sudo aptitude install apache2 php5-cli libapache2-mod-php5 php5-xmlrpc php5-sqlite libapache2-mod-scgi
sudo nano /etc/apache2/mods-available/scgi.conf
[/bash]

写入

[bash]SCGIMount /RPC2 127.0.0.1:5000[/bash]

 

[bash]sudo a2enmod scgi
sudo service apache2 restart[/bash]

用phpinfo看mod_scgi加载没有
完事后安装webUI，放到web目录下，这个是老版本的rutorrent UI，和IE兼容的比较好，UI比较清爽
[download id="17" format="2"]

这个是最新的Featured 3.1，我测试了下，就Firefox下面可以打开，功能好全，支持显示CPU啊，生成种子啊啥的
[download id="19" format="2"]

ruTorrent v 3.1 doesn't support LAST svn version of rTorrent yet. Only revision 1148 and previous.

具体见rutorrent项目主页
http://code.google.com/p/rutorrent/

---

PPA有个支持IPv6的deb文件，有兴趣可以试试,我不知道可不可以用。
https://launchpad.net/~berni/+archive/ipv6

---

more see :https://wiki.archlinux.org/index.php/RTorrent_(%E7%AE%80%E4%BD%93%E4%B8%AD%E6%96%87)

Author Info :

From:编译支持ipv6的rtorrent并配置webUI

URL:https://blog.ihipop.com/2010/08/1363.html

Please Reserve This Link,Thanks!

本作品采用知识共享署名-非商业性使用 3.0 Unported许可协议进行许可。